Green Power Amorphous Motor

The DC EMI filter with fewer winding turns, but higher inductance., gurantee solar inverter has high voltage gain and high efficiency.

A 3mm gapped nanocrystalline core winding coils for hall effect current Sensor based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. Stable working peroformance

The overhead output power supply device is an open structure, with an aluminum alloy case, it's  suitable for overhead transmission lines with a voltage of 35KV and above. The product obtains a low voltage and safe working power supply through the principle of electromagnetic induction, and provides electrical power to the monitoring device with the assistance of photovoltaic panels.

The inductive Power Supply Current Transformers usually installed outdoors or in underground cable trenches and tunnels, with the working environment maybe raining, moisture, water accumulation. Once the split core CT with poor structure, the core cutting surface will be easy to rust, which affects the power supply ability, increasing working noise, even can't work. After long time R&D, our Coilcore's latest inductive Power Supply Current Transformers reach IP68 standard, which can achieve zero noise operation.

CT power supply (induction power supply), is a device that uses CT installed on power lines to obtain power through electromagnetic induction principle. It consists of two parts: the power supply CT (energy transformer) and the power conversion module (converting the electrical energy obtained by CT into the required DC voltage). Our Power Conversion Module has intelligent power management based on energy harvesting, with conversion efficiency ≥90%, IP68 design perfect for outdoor application.

Split Core Current Transformer is suitable for indoor units with rated voltage of 10KV and below. It's for circuit control, measurement, line transformation measurement and protection.

THK600 EKA5S2  Open loop current transducer using the hall effect for the electronic measurement of current: DC, AC, Pulsed, with galvanic separation between primary circuit and secondary circuit, which supply voltage DC+5.0V.

Toroidal output transformers, popular in industrial, green power, railway, medical, lete-communications, defence field.