• November 22. 2024

With the rapidly development of new energy products such as photovoltaics & automobiles, the glue filling process is becoming increasingly common in transformers (inductors). To improving the efficiency of glue filling, manufacturers have equipped automated glue filling production lines, glue filling has gradually become the standard production process for transformers (inductors). Well,today,...

• September 04. 2025

With high magnetic permeability, low coercivity, the soft magnetic materials are easily magnetized and demagnetized. They are widely used in motor stators and rotor cores to guide magnetic flux and complete electromagnetic energy conversion in motors. With a global annual production of about 10 million tons, accounting for 80% of the soft magnetic material market, traditional non oriented silicon ...

• May 20. 2026

In recent years, as power grids have increasingly advanced toward intelligent and automated operation, real-time monitoring of power systems—such as insulation monitoring of transmission lines, fault location in distribution networks, and overhead line icing detection—has become a critical focus. Given the high voltage levels of transmission lines, monitoring equipment is often exposed to prolonge...

• May 29. 2026

In our previous discussion, we noted that the magnetic core adopts an open-gap design, and through optimal parameter selection, the dead-zone current is effectively reduced. By analyzing the variation patterns of load and number of turns, we employed a method combining multiple turns with parallel resistors to suppress magnetic saturation. This approach successfully addresses the challenge of stab...