English
High saturation magnetic induction (Bs), popular used in vehicle audio application.
Key Properties:
Typical Parameter
Density
7.3g/cm3
Curie Temperature
Tc =410°C
crystallization temperature
Tx =530°C
Saturation
Bs= 1.56T
Electrical Resistivity
ρ=130Ω-cm
Saturation Magnetostriction
λs=27x10-6
Product Description:
For Car Audio application Amorphous core, we supplier from core to coil based on clients request.
Standard Product list:
download, and part test report reference as below:
OEM design is supported. We design & produce goods based on specifications & drawing, specification including:
1. Bare core size, Size finished
2. Parameter, AL @ DC bias =0A ; AL@DC bias=1A/2A/3A....
3. 3. What diameter of copper wire for coil.
Main Application:
As an leading manufacturer of amorphous and nanocrystalline core products, Coilcore provides quality services to customers with high-performance products and one-stop solutions. By leaving a message below to get more details about Vehical Amorphous Cores quickly!
If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
Iron Powder cores are distributed air gap cores, with excellent inductance stability under both DC &AC conditions, high resistivity, low hysteresis & eddy current losses.
An open loop device hall effect current Sensor based on the measuring principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provided to measure DC, AC and pulse current and another arbitrary waveform current.
The inductive Power Supply Current Transformers usually installed outdoors or in underground cable trenches and tunnels, with the working environment maybe raining, moisture, water accumulation. Once the split core CT with poor structure, the core cutting surface will be easy to rust, which affects the power supply ability, increasing working noise, even can't work. After long time R&D, our Coilcore's latest inductive Power Supply Current Transformers reach IP68 standard, which can achieve zero noise operation.
CT power supply (induction power supply), is a device that uses CT installed on power lines to obtain power through electromagnetic induction principle. It consists of two parts: the power supply CT (energy transformer) and the power conversion module (converting the electrical energy obtained by CT into the required DC voltage). Our Energy Harvesting current transformer, IP68 design, hasas excellent waterproof performance and can work for a long time in outdoor water environments.
IP67, excellent waterproof performance, works well even under water condition 3 days.
THK600 EKA5S2 Open loop current transducer using the hall effect for the electronic measurement of current: DC, AC, Pulsed, with galvanic separation between primary circuit and secondary circuit, which supply voltage DC+5.0V.
Customized Common Mode Inductor produce, and expert suggestion from us with more stable electronic performance too.
Our product lineup serves a diverse set of photovoltaic/wind energy inverters solutions, help you solve problems at one station.
For inquiries about our products or pricelist, please leave to us and we will be in touch within 24 hours.
Call At :
Tel : +86-20-85649266
Fax : +86-20-85649263
Email Us :
Email : derful@coilcore.com
Address :
A402 Zhuangyuangang Industry Park, No.186 Qishan Road, Tianhe District, Guangzhou 510663
© Copyright: 2026 Guangzhou Amorphous Electronic Technology Co.,ltd. All Rights Reserved. 粤ICP备2021057165号
IPv6 network supported
