Search
Home Search

  • Soft Magnetic Materials Nanocrystalline Alloy
    • March 17. 2021
    Soft Magnetic Materials Nanocrystalline Alloy

    Guangzhou Amorphous Electronic Technology Co.,ltd use soft magnetic materials high permeability nanocrstalline strips for cores and current transformer production. Following information about nanocrystalline alloy: On the basis of the Fe-Si-B alloy composition, extral added with a trace amount of elements Cu, Nb, and prepared the amorphous ribbon by rapid solidification with a cooling rate of abou...

  • Soft Magnetic Amorphous Alloys for Amorphous Transformer
    • May 13. 2021
    Soft Magnetic Amorphous Alloys for Amorphous Transformer

    Guangzhou Amorphous Electronic Technology Co.,ltd use high permeability Amorphous strips for Amorphous cores and current transformer production. Following information about Amorphous alloy: When the alloy is super-rapidly solidified, the atoms cannot be arranged in time to crystallize, then amorphous alloys are obtained. The amorphous alloys with long-range disorder but short-range orderly structu...

  • Why Toroidal Transformers Are Popular?
    • May 19. 2021
    Why Toroidal Transformers Are Popular?

    We, Guangzhou Amorphous Electronic Technology Co.,ltd, focus on power solutions magnetic transformers, which popular for green power, military, telecommunications, medical, industrial, rail. Toroidal transformers are passive electronic components, made by circular ring or donut shaped magnetic core of ferromagnetic materials, and then wire wound acroundly. Comparing traditional laminated transform...

  • High Accuracy Factory Split Core Current Transformer
    • May 25. 2021
    High Accuracy Factory Split Core Current Transformer

    Coilcore’s Split core current transformers are designed to meet the growing demand of installation into existing networks. Our Split Core (open-able) CTs can be a savings overall in the labor cost savings.Simply clip these around the wires being read. Secure them in place with a zip tie, without disconnecting cables or busbar circuits. Split Core Current Transformer is suitable for ...

  • Annealing and varnishing process of Fe82Si3.8B13.9C0.3 amorphous iron core with high saturation magnetic induction
    • May 31. 2021
    Annealing and varnishing process of Fe82Si3.8B13.9C0.3 amorphous iron core with high saturation magnetic induction

    The addition of C in the FeSiB alloy system can help to improve the amorphous forming ability, and then design high saturation magnetic flux density amorphous alloy materials, but studies have found that excessive C content will cause the soft magnetic properties of FeSiBC alloys to decrease. The low carbon content FeSiBC material system has a good application prospect in high frequency and high s...

  • Power Transformers New Standards Are Officially Implemented
    • June 08. 2021
    Power Transformers New Standards Are Officially Implemented

    On June 1, 2021, the new standard of power transformers (current transformer core ) was officially implemented. Transformers are basic equipment for power transmission and distribution, which are widely used in industries, agriculture, transportation, and urban communities. About 40% of the power loss of transmission and distribution is the transformer loss , which means it has great potential for...

  • What's different application of amorphous, nanocryatalline soft magnetic cores?
    • June 24. 2021
    What's different application of amorphous, nanocryatalline soft magnetic cores?

    A magnetic core is made by ferromagnetic metal or ferrimagnetic compounds, the core with a high magnetic permeability, which popular used to confine and guide magnetic fields in electrical, electromechanical and magnetic devices. The magnetic field created by a current-carrying coil of wire around the core. Comparing no magnetic core, use a magnetic core can increasing the strength of magnetic fie...

  • Common Mode Choke
    • July 02. 2021
    Common Mode Choke

    Common Mode Chokes When we said a common mode choke, it means it was wound both line and neutural windings on a single core. Since the noise would be common mode noise usually, the way to lower (if not eliminate) the unwant noise frequencies is to use a common mode choke As below picture show us details of Common-Mode Signals Defined: Such signals can arise from one or more of the following source...

    A total of

    8

    pages

© Copyright: 2024 Guangzhou Amorphous Electronic Technology Co.,ltd. All Rights Reserved. 粤ICP备2021057165号

IPv6 network supported

IPv6 network supported

top

Leave A Message

Leave A Message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

  • #
  • #
  • #
  • #